Mission 2 – Training Day

Tom Clancy's HAWX 2 Walkthrough and Guide

by vhayste  

 
 
Back to Tom Clancy's HAWX 2 Guide Index
 
More for this game: PS3 | Xbox 306 | PC
 
 
Print page (no screenshots)   |   Print page
 



Mission 2 – Training Day

Lt. Colin Munro
Callsign: Polaris 4
Aircraft: Eurofighter Typhoon
Weapon loadout: Heat Seeking Missile x100, Flares x12

After taking off, join the other polaris unit and stick close to them until your first task. For your first task, you need to engage and attack the AWACs then Polaris 1. After getting cleared for the current training segment, you'll then need to use your missiles. Engage and shoot down the targets. Make sure that you release the missiles once the reticule turns red. After clearing this segment, fly to the next training area.


In this segment, you'll learn the basic defensive manuevers. Make sure to learn them by heart as you'll need them in the upcoming missions. First training is flare deployment. Evade three missiles using flares to clear this lesson.


Flares

Next, you'll need to evade the missiles using evasive manuevers. Just make a sharp turn by braking hard and pitching in any direction. Kick the afterburners as you exit the turn to prevent your plane from stalling and to recover.


Evasive Manuevers

Once done with those two, fly to the dogfighting area. Put all the offensive and defensive manuevers you've learned moments ago and take out the assigned targets. After getting evaluated, fly to the next training area. A civilian aircraft will enter the area and you'll be asked to do a visual inspection. Approach the aircraft and watch the scene.


After the explosion, your plane will be stalled. Pitch up and hit the afterburners to recover from the freefall. Finally, you'll need to land your plane. You can turn on the assistance if you want. Slowly approach the landing field then lower the landing gear when you're prompted to do so. Carefully descend and reduce speed. Once your tires touches the ground, hit the brakes hard to stop the plane. If the angle of your landing is way off, fine tune your direction using the yaw buttons (RB/LB).




Guide
Contents
 
 

Comments for Mission 2 – Training Day

 
 
Add a comment
 
5 comments, latest first.
 
Impossible to take off, when accelerating the plane explose and that it.
Is it a bug?

Guest
Added 26th Jun 2015, ID #575688

 
To land. Press the. X, press the left trigger to slow your air speed, when it gets to the speed indicated on the left side of the screen. The "y" button pops up on bottom of screen. Press it to lower the landing gear. You can also do "touch and go's". When you touch down, just keep rolling down the runway, keeping near the center and "go"(take off again). Once airborne, press "B" to abort the landing(ie: raise the landing gear gain a little altitude and go for another landing. Following the above steps. Also ensure the a/c is slightly nose up, past the initial landing stripes at the beginning of the runway, and the aircraft bar indicator on the heads up display is green, red indicates a nose down attitude(nose gear touches first), and sometime causes it to crash. You also crash if you stray off the runway, the a/c at bad angle(either rolling too far left or right, or nose too high ot too low or. If the rate of descent is too fast(too hard of a landing. Hope this helps.

Guest
Added 21st Feb 2015, ID #518973

 
How to get out the Landing Gear/Wheels?
And IF some one have any trix how to Land safly because in my case the bloody plain explode every FxzING time.
(sorry for my poor english from Sweden)

zorro2000se
Added 23rd Dec 2014, ID #488643

 
how to change d default pilot view into this view?

Guest
Added 28th Apr 2013, ID #278244

 
Worthless, never say how to deploy flares - assume to much

Guest
Added 6th Feb 2012, ID #112621