Guys, I can't walk slowly on my dolphin emulator while playing Pokemon XD. This cause me can't go near to Bonsly and I cannot continue my mission.
Guys, pls help. URGENT!!!!!
Please be as detailed as you can when making an answer. Answers that are too short or not descriptive are usually rejected.
Please do not use this box to ask a question, it will be rejected - this box is for answers ONLY. If you want to ask a question for this game, please use the ask a question box which is above on the right.
Accept submission terms View Terms
You are not registered / logged in.
If you would like to ne notified if/when we have added this answer to the site please enter your email address.
We will only use this address to email the confirmation for this answer.
Either you need to be extremely careful or stop using the emulator. If the latter you may need to start the game over
On the emulator configuration, go to the GCpad option. Right click on the movement buttons, and set the value to 30. That does the trick.
In the dolphine emulator there is an option TAS input in emulation section you can handle the speed of you're walking there
So after some long research I finally figured out how to walk slowly in Pokemon XD, in the "gcpad setting" either at the main stick or at the C-stick you can assign a key for the "Modifier" after that when you are ingame you have to keep that key(button) pressed down, HOLD IT DOWN for as long as you wish to walk slowly. (P.S. First I tryed to just press it once but it took me a lot to figure out that you have to HOLD it down. The "Modifier" simply reduces the walking speed by 50% which is enough for it to let you go up to that bonsly.)
On the C-Stick section, trying setting the ''RADIUS'' to lower number and it will change the number of how fast you running or how slow you walking. When doing it, you've to use the C-stack buttons on the pad.
In the new dolphin emulator, go to the controllers tab. Click in the configure button in whichever port you are using and in right click on the hotkeys that you are using for movement. Then slide the sidebar to 26 for all of them. Click apply and ok on everything and it should work.
Go to controlers option click cofigure in the game cube controlers set the radius of control stick and c stick as 30. If you the speed will be reduced and you can catch bouncy
For more questions for Pokemon XD: Gale of Darkness check out the question page where you can search or ask your own question.