How do I use a Warp code?
Please be as detailed as you can when making an answer. Answers that are too short or not descriptive are usually rejected.
Please do not use this box to ask a question, it will be rejected - this box is for answers ONLY. If you want to ask a question for this game, please use the ask a question box which is above on the right.
Accept submission terms View Terms
You are not registered / logged in.
If you would like to ne notified if/when we have added this answer to the site please enter your email address.
We will only use this address to email the confirmation for this answer.
You use a cheat device then your put the code, enter a building, then go back and then your in a different place.
You need to activate it, have the Master[M] Code on and make sure that you pressed the correct button to Warp.
Keep in mind that the warp codes I have need to be turned off once you get to where you wanted to go, because if not, then you may end up just warping over and over to the same spot, and not be able to get to the Pokemon. When you get to the island or where ever, just make sure it's off if you need to go through a door or change areas or something, you turn the AR (if it's an AR) switch off once you get there especially if you keep going back to the same place over and over when you're trying to go elsewhere. Some codes you can hold down the Right button to accomplish this, but I don't know which ones you have.
Also, you will need a Master Code, a DMA Disable Code, and the Warp Code all on at the same time for it to work, and turn any other codes off. Then just go through any door and POOF! You'll be warped there.
For more questions for Pokemon LeafGreen check out the question page where you can search or ask your own question.